Finished in metallic gold, with an ice blue LED in the center of the eye. The LED is rated from 6-12V so you can hook it up to a controlled lamp or a flasher of your choice. The higher the voltage, The brighter the LED will shine. This mod is 3D printed, but finished with high build primer that diminishes most of the visible 3D printed layers. The pyraMOD is designed to mount on the mini-playfield bottom exit hole, with 2 of the 4 existing screws there. (beware not to over tighten these screws - they screw into the plastic opto mounts) Comes with quick connect connector and crocodile clips. Soldering is always recommended if possible, and at your own risk.
