This simple mod will help with the issue on your Bond pinball machine when the bond girl loop shot switch (from the upper flipper) frequently does not register. The cause of this issue is that ball will often “hop” over the switch due to its speed, even with the flipper power lowered from 220 (default) to 180.
This mod keep the ball from rising up above the switch by creating a ceiling for the lane. It has been tested extensively and addresses the ball hop issue 100% of the time at 220 power and below.
Please indicate your model (Pro, Premium, LE). For Premium and LE machines, a hole is cut in the plastic to allow the ball to drop into the lane if the ball is released from the "Bond on a Wand" mech in that area.
More info and the installation video is below.
Installation takes no more than 5 minutes, does not require you to lift the playfield, and uses the existing hardware on your pinball machine. It’s made from 3.175mm clear cast acrylic and laser cut.
